2019 Ford F-Series F150 F250 F350 Keyless Entry Remote Fob Programming Instructions (2022)

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 2019 Ford F-Series F150 F250 F350 F450 F550 F650 F750

Time needed:3 minutes.

2019 Ford F-Series F150 F250 F350 Keyless Entry Remote Fob Programming Instructions (1)
FLIP KEY
Step-By-Step How To Programming Instructions

  1. Confirm First Programmed Key – Step 1

    INSERT the first previously programmed transponder key into the ignition.

  2. Confirm First Programmed Key – Step 2

    TURN the ignition from OFF to ON. KEEP the ignition ON for at least 3 seconds, but no more than 10 seconds.

  3. Confirm First Programmed Key – Step 3

    TURN the ignition OFF and REMOVE the first key from the ignition.

  4. Confirm Second Programmed Key – Step 1

    After 3 seconds, but within 10 seconds of turning the ignition OFF, INSERT the second previously programmed key into the ignition.

  5. Confirm Second Programmed Key – Step 2

    TURN the ignition from OFF to ON. KEEP the ignition ON for at least 3 seconds, but no more than 10 seconds.

  6. Confirm Second Programmed Key – Step 3

    TURN the ignition OFF and REMOVE the second key from the ignition.

  7. Program New Flip Key – Step 1

    After 3 seconds but within 10 seconds of turning the ignition OFF and removing the second key, INSERT the NEW un-programmed key into the ignition.

  8. Program New Flip Key – Step 2

    TURN the ignition from OFF to ON. KEEP the ignition ON for at least 6 seconds.

  9. Exit Programming Mode

    REMOVE the NEW key from the ignition.

    If the key was successfully programmed, it will operate the remote entry system and start the vehicle’s engine.

    If the key was NOT successfully programmed, it will NOT work the remote entry system or start the vehicle’s engine. Wait 20 seconds and repeat the process from Step 1.

  10. Test Remotes

    TEST all remotes. Programming is complete.

  11. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Important:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • You must have 2 working transponder chip remote head keys in order to program a new remote head key without the assistance of a professional.
  • The key to be programmed must be cut prior to beginning this programming procedure.
  • To program any additional new keys, wait 20 seconds and REPEAT this procedure.

Note: If your vehicle cannot enter programming mode, then you cannot program any remote. This indicates either no keyless entry installed on the vehicle or a defective keyless entry receiver module.

Time needed:4 minutes.

2019 Ford F-Series F150 F250 F350 Keyless Entry Remote Fob Programming Instructions (2)
PROXIMITY SMART KEY FOB REMOTE
Step-By-Step How To Programming Instructions

  1. Confirm First Programmed Smart Key – Step 1

    PLACE the first programmed smart key in the backup slot in the center console.

    The key ring MUST be at the top with the buttons facing towards the FRONT of the vehicle.

  2. Confirm First Programmed Smart Key – Step 2

    PRESS the START/STOP button on the vehicle.

  3. Confirm First Programmed Smart Key – Step 3

    WAIT 5 seconds and PRESS the START/STOP button on the vehicle AGAIN.

  4. Confirm First Programmed Smart Key – Step 4

    REMOVE the first programmed key from the center console.

  5. Confirm Second Programmed Smart Key – Step 1

    Within 10 seconds, PLACE the second programmed smart key in the backup slot in the center console.

  6. Confirm Second Programmed Smart Key – Step 2

    PRESS the START/STOP button on the vehicle.

  7. Confirm Second Programmed Smart Key – Step 3

    WAIT 5 seconds and PRESS the START/STOP button on the vehicle AGAIN.

  8. Confirm Second Programmed Smart Key – Step 4

    REMOVE the second programmed key from the center console.

  9. Program New Smart Key – Step 1

    WAIT 5 seconds and PLACE the NEW un-programmed smart key in the backup slot in the center console.

  10. Program New Smart Key – Step 2

    PRESS the START/STOP button on the vehicle.

  11. Program New Smart Key – Step 3

    WAIT 5 seconds and PRESS the START/STOP button on the vehicle AGAIN.

  12. Test Remotes

    TEST all remotes. Programming is complete.

  13. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Important:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • You MUST have 2 working smart keys (keys that start your vehicle) in order to perform this programming procedure without the assistance of a professional.
  • A MAXIMUM of 4 smart keys can be programmed to your vehicle. If you’ve had 4 programmed in the past, seek the assistance of a professional programmer.
  • Ensure that the vehicle is OFF prior to beginning this procedure. CLOSE all doors prior to beginning this procedure.
  • You MUST perform ALL steps within 30 seconds of starting the programming procedure.
  • You MUST wait 60 seconds before repeating the procedure after an unsuccessful attempt.

Note: If your vehicle cannot enter programming mode, then you cannot program any remote. This indicates either no keyless entry installed on the vehicle or a defective keyless entry receiver module.

If you have any difficulties with programming your vehicles, contact us at[emailprotected].

Out of stock

F-Series (F150)

2015-2020 Ford F-150 Flip Key Fob Remote (FCC: N5F-A08TAA, P/N: 164-R8130)

Rated 5.00 out of 5

Dealership: $220.00

$49.94$64.94

Out of stock

F-Series (F150)

2015-2021 Ford F-150 4-Button Flip Key Fob Remote Start (FCC: N5F-A08TDA, P/N: 164-R8134)

Rated 5.00 out of 5

Dealership: $220.00

$69.94$109.94

Out of stock

F-Series (F150)

2018-2020 Ford F-150 3-Button Smart Key Fob Remote (FCC: M3N-A2C93142300, P/N: 164-R8163)

Dealership: $250.00

$49.94$69.94

Out of stock

F-Series (F150)

2018-2022 Ford F-150 5-Button Smart Key Fob Remote Start Tailgate Release (FCC: M3N-A2C93142600, P/N: 164-R8166)

Rated 5.00 out of 5

Dealership: $250.00

$59.94$69.94

Out of stock

F-Series (F250 F350)

2017-2022 Ford F-250 F-350 Super Duty Flip Key Fob Remote (FCC: N5F-A08TAA, P/N: 164-R8130)

Rated 5.00 out of 5

Dealership: $220.00

$49.94$64.94

Out of stock

F-Series (F250 F350)

2017-2022 Ford F-250 F-350 Super Duty 4-Button Flip Key Fob Remote Start (FCC: N5F-A08TDA, P/N: 164-R8134)

Dealership: $220.00

$69.94$109.94

Out of stock

F-Series (F250 F350)

2017-2022 Ford F-250 F-350 Super Duty 3-Button Smart Key Fob Remote (FCC: M3N-A2C93142300, P/N: 164-R8163)

Dealership: $250.00

$49.94$69.94

Out of stock

F-Series (F250 F350)

2017-2022 Ford F-250 F-350 Super Duty 5-Button Smart Key Fob Remote Start Tailgate Release (FCC: M3N-A2C93142600, P/N: 164-R8166)

Rated 4.89 out of 5

Dealership: $250.00

$59.94$69.94

Out of stock

F-Series (F450 F550)

2017-2022 Ford F-450 F-550 Super Duty Flip Key Fob Remote (FCC: N5F-A08TAA, P/N: 164-R8130)

Dealership: $220.00

$49.94$64.94

Out of stock

F-Series (F450 F550)

2017-2022 Ford F-450 F-550 Super Duty 4-Button Flip Key Fob Remote Start (FCC: N5F-A08TDA, P/N: 164-R8134)

Dealership: $220.00

$69.94$109.94

Out of stock

F-Series (F450 F550)

2017-2022 Ford F-450 F-550 Super Duty 3-Button Smart Key Fob Remote (FCC: M3N-A2C93142300, P/N: 164-R8163)

Dealership: $250.00

$49.94$69.94

Out of stock

F-Series (F450 F550)

2017-2022 Ford F-450 F-550 Super Duty 5-Button Smart Key Fob Remote Start Tailgate Release (FCC: M3N-A2C93142600, P/N: 164-R8166)

Rated 4.67 out of 5

Dealership: $250.00

$59.94$69.94

Out of stock

F-Series (F650 F750)

2017-2022 Ford F-650 F-750 Super Duty Flip Key Fob Remote (FCC: N5F-A08TAA, P/N: 164-R8130)

Dealership: $220.00

$49.94$64.94

Out of stock

F-Series (F650 F750)

2017-2022 Ford F-650 F-750 Super Duty 4-Button Flip Key Fob Remote Start (FCC: N5F-A08TDA, P/N: 164-R8134)

Dealership: $220.00

$69.94$109.94

Out of stock

F-Series (F650 F750)

2017-2022 Ford F-650 F-750 Super Duty 3-Button Smart Key Fob Remote (FCC: M3N-A2C93142300, P/N: 164-R8163)

Dealership: $250.00

$49.94$69.94

Out of stock

F-Series (F650 F750)

2017-2022 Ford F-650 F-750 Super Duty 5-Button Smart Key Fob Remote Start Tailgate Release (FCC: M3N-A2C93142600, P/N: 164-R8166)

Rated 5.00 out of 5

Dealership: $250.00

$59.94$69.94

Why NorthCoast?

2019 Ford F-Series F150 F250 F350 Keyless Entry Remote Fob Programming Instructions (35)

MONEY BACK GUARANTEE

We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.

2019 Ford F-Series F150 F250 F350 Keyless Entry Remote Fob Programming Instructions (36)

FAST & FREE SHIPPING

ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!

2019 Ford F-Series F150 F250 F350 Keyless Entry Remote Fob Programming Instructions (37)

CUSTOMER SUPPORT

Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.

2019 Ford F-Series F150 F250 F350 Keyless Entry Remote Fob Programming Instructions (38)

SAVE 70% OVER DEALERSHIPS

We’ve worked hard to create a network of reliable and reasonably priced suppliers that allow us to give you rock bottom prices.You're also not paying for huge fancy offices or sports cars for our Owners. We always will be just regular people tryin’ to make a livin’ not a killin’!

NorthCoast Keyless Free Programming Instructions Disclaimer:

  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [emailprotected] and we’ll make sure that you’re taken care of.

You might also like

Latest Posts

Article information

Author: Fredrick Kertzmann

Last Updated: 07/20/2022

Views: 6521

Rating: 4.6 / 5 (46 voted)

Reviews: 85% of readers found this page helpful

Author information

Name: Fredrick Kertzmann

Birthday: 2000-04-29

Address: Apt. 203 613 Huels Gateway, Ralphtown, LA 40204

Phone: +2135150832870

Job: Regional Design Producer

Hobby: Nordic skating, Lacemaking, Mountain biking, Rowing, Gardening, Water sports, role-playing games

Introduction: My name is Fredrick Kertzmann, I am a gleaming, encouraging, inexpensive, thankful, tender, quaint, precious person who loves writing and wants to share my knowledge and understanding with you.